Attachments

Click on a thumbnail picture for more information

Conveyor Image Conveyor Image Conveyors

The Voorwood return conveyor is designed to handle the fast pace of end-to end feeding on Shaper/Sanders and Edge Foilers. This return conveyor will give you the leading edge in today’s competitive environment. Shown with Voorwood A525CNC Arch Shaper Sander.
Image of the ramp conveyor Larger view of the ramp conveyor Transfer Ramp Conveyor

The Transfer Ramp Conveyor is an option used in conjunction with a double-sided shaper that is equipped with a return belt system that can transfer the finished parts onto the Ramp Conveyor returning them to the waist-level of the operator or into a portable material handling cart.
    Features:
  • Moveable
  • Variable speed and wired to run at the same speed as the machine
  • 29" wide x 58" long
  • Infeed Height 17"
  • Outfeed Height 32"
DSAI Image DSAI Image DSAI Sanding Attachment

Sand complex profiles by mounting Voorwood’s DSA I Rotary Sanding Module on your single and/or double end tenoners. Featured with tandem sanding station, each station has horizontal, vertical and angular adjustments for precision set-ups. One horsepower motors drive the spindles. The module is pre-wired, includes dust hoods and a mounting plate for quick installation.
DSAII Image DSAII Image DSAII Sanding Attachment

Sand complex profiles by mounting Voorwood’s DSA II Rotary Sanding Module on your single and/or double end tenoners. Featured with tandem sanding station, each station has horizontal, vertical and angular adjustments with digital indicators for precision set-ups. Three quarter horsepower motors drive the spindles. The module is pre-wired, includes dust hoods and a mounting plate for quick installation.
Thumbnail of an SS64 Size and Square Attachment Larger Image of SS64 Unit SS64 Size & Square Unit

The sizing and squaring unit is an option offered with Voorwood’s edge finishing machines. This device allows the operator to easily size and square rough-cut substrates. Using a rip fence system controlled by a stepper motor, the operator only needs to input the desired length or width of the substrate and the fence will automatically move to the correct position. A pneumatically actuated squaring bar is used to square the substrate once a true edge is established.
Image of the Hopper Feeder Larger image of the Feeder Auto Hopper Feeder

The Hopper Feeder is an option offered with Voorwood’s profile wrapper systems. The belt feed Hopper Feed table will feed a stack of mouldings allowing the operator to load the hopper and then perform other duties.
    Features:
  • Belt feed 25-250 fpm
  • Powered by 3 hp AC VPD motor
  • 12' infeed table with eight rollers
  • 34.5" belt height adjustable +/- 5"
  • Adjustable 12" high gates with maximum 1.75"x 12"capacity
  • Floor Space 24"x 146.75"
thumbnail image of the RSM2600 larger image of the RSM2600 RSM2600 Motorized Reel Stand

The RSM2600 Motorized Reel Stand is an option offered to converting machine users. It can be used for holding and handling a variety of large rolls of film while performing decoiling and recoiling operations.
    Features:
  • Portable
  • 1/2 HP Reversible motor with pendant controls
  • Approximate 0-100 RPM operating range
  • 3" Diameter shaft
  • 3300 lbs. maximum roll weight
  • 106" wide x 60" diameter maximum roll size
thumbnail image of the scissor lift with rotating table large view of the scissor-lift SL900RT Scissor-Lift

The SL900RT Scissor Lift can be used for a variety of material handling needs for either lowering or lifting to the desired height and position
    Features:
  • Table Top 48" Width by 72" length
  • Table capacity 3500 lbs
  • Table lifts from 10" to 45"
  • Table can continuously rotate 360 degrees or lock in any (4) 90 degree positions.
  • Controlled by one up & one down foot pedal with safety latch to protect against accidental operation.